 |
 |
 |
|
| The Enable-IT™ 865 Single-Line Ethernet Extender Kit is the world’s only
available solution to deliver Voice, Data and PoE in a combined package that
exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af
PoE. The 865 enables the simple installation of a PoE device up to 2,500ft
(762m) From your LAN and Power Source. – This is ideal for installing PoE IP
Security cameras or PoE WiFi Access Points or for a standalone remote self
powered LAN up to 3,500ft (1,067m).
These extenders drive the reach of
Ethernet to more than (10.7) ten times the typical Ethernet distance.
2,500ft/762m distance if using the PoE power to drive up to a 24v PoE device or
3,500ft/1,067m distance if using the PoE power standalone for the remote 865 CPE
device only and LAN2 output for data/voice. The 865 kit can even be used on live
voice wiring transparently; try that with your expensive LRE. No other Ethernet
Extender manufacturer supports voice over the same pair of wire with data and
PoE. Only Enable-IT extenders can. Made in the USA with quality and
pride - the only manufacturer to do so in this industry.
To
increase the durability and extended use of the product providing maximum future
technology protection, 865 Extended PoE and Ethernet Units have been designed to
meet the challenge of modern switched LANs and allows you to add features and
capacity as your network expands. The 865 units have been tested to provide full
duplex transport up to 100MB/s over CAT2 cabling or better. These unit also
support the use of standalone PoE injectors natively.
About our Company
Ethernet Extension Experts Extender devices were pioneered by Enable-IT, Inc.
in 1997 and employ both powered and un-powered use of transmission technologies
for use over CAT-2 untwisted copper wire up to Cat-6 UTP, telephone wire, coax,
alarm circuit, dry pair or wet pair cabling. This means we offer a solution for
just about everyone – no matter what your current Ethernet setup is, chances are
we can extend it significantly – without hassles, and without excessive
costs.
|
|
|
|
|
|
 |
|
 |
|
Features
- Extended Ethernet with Power over Ethernet(PoE) on 2, 3 or 4 pair existing
- Telephone wiring or category rated wiring.
- IEEE 802.3af PoE is delivered on pins 4/5 - positive and 7/8 - negative -
- Custom Reverse polarity cable available on request
- Rapid LAN style installation RJ45 jacks - no programming required.
- Dongles provided on each end for using RJ-11 telephone jacks
- Supports VoD (Video on Demand) and MPEG IP channels.
- Supports VoIP (Voice over IP).
- Network Equipment independence - Transparent to protocols, applications and
- MAC addresses.
- Sustained full-duplex service delivery end to end.
- Native PoE support for any standalone PoE injector to 2,500ft and up to
- 3,500ft when used for self powered LAN mode only.
Highlights- Reverse polarity support for (Cisco & Motorola) PoE equipment
- Longest warranty protection included exceeding any knockoff
- competitors.
- Broadband Technology that delivers extended Ethernet & PoE over existing
- 2 pair telephone wiring or better up to 2,500ft (672m); including active
- telephone (POTS) line. This means no new wiring is required
- Provides one scalable infrastructure for PoE, Ethernet data, POTS, VoIP,
- video, and virtual private networking.
- Quick install RJ-45 connection to infrastructure for voice in and voice
- & data out.
- Quad LAN ports on each end to eliminate the need for LAN switches.
- Pricing ($599) is for a complete solution This kit includes the
- following:
- (2) 865 PoE LRE units
- (2) 10' Black Ethernet patch cords
- (2) Country specific switching wall power adapters
- (2) RJ-45 to RJ-11 (dual head) dongles
- (1) 865 Ethernet Extender Installation Manual
- (1) 360 PoE Injector Installation Manual
|
|
|
 |
|
 |
|
|
|
